The Model FWT-200S Opti-Chromic Reader System offers a state of the art performance for both high and low volume users of Opti-Chromic Dosimeters. This reader is fast, accurate and above all easy to use.
The system consists of a reader head, ISA interface card that plugs into the inside of your PC and assorted programs. The interface card and cable are the same as used with the Model FWT-100 Radiachromic Reader Head, but each system uses different software.
The addition of the computer to the measurement cycle reduces the complexity of the system. The computer does all the calculations necessary not only to take a reading but also to reduce the data and store it for later reference or reporting. It assists the user by performing the following tasks:
The computer will set the zero at the user’s request.
Data reduction: The computer will accept the user calibration data and report the calculated dose using all necessary parameters.
Beginning with version 2.0 the software is compatible with Windows 7, Windows 10 . The windows version of the software is a dynamic data exchange (DDE) server. It provides information on the absorbance readings for both the 600 nm and the 656 nm analysis wavelengths to DDE client programs such as Microsoft Excel or Access. A sample Excel spreadsheet is included to illustrate how data may be accessed by Excel’s DDE functions. Due to the critical timing needed to measure absorbance it is best if the DDE server and client are the only programs running on the computer.
The Opti-Chromic head has a holder located under a cover. Place the dosimeter in the holder and close the lid. The computer will signal when the reading is complete
OD Range: 0.001 to 2.60.
Wavelength Select: 600 nm or 656 nm.
Reference Wavelength: 750 nm
Warm Up Time: 10 minutes
Drift: Automatic zero
Photometric Precision: ±0.003 OD @ 0.000 to 1.000 OD; ±1% of reading @ 1.000 to 1.999 OD;± 2% of reading @ 2.00 to 3.00 OD
Filter Wavelength:± 2 nm
Filter Bandwidth: 600 nm: 10.1 nm ± 1.5 nm; 656 nm: 11.5 nm ± 1.5 nm, 750 nm: 13.4 nm ± 1.5 nm
Lamp life: 8,000 hours
Size: 20 W x 18 D x 8 H cm (8 x 7 x 3.2 in)
Supplied: Model FWT-200 Head, Model FWT-300 ISA Interface Card, Cable and Software